Dashboard Side Vent Removal/Installation: Passenger's

NOTE: Take care not to scratch the dashboard and related parts.

Remove these items:
- Glove box (see GLOVE BOX REMOVAL/INSTALLATION )
- Passenger's dashboard trim (see PASSENGER'S DASHBOARD TRIM REMOVAL/INSTALLATION )
Push on the lower clips (A) by hand to release them. Then gently press up on the passenger's side vent (B) from the bottom to release the outer side clips (C). While gently pressing up on the passenger's side vent, pry the passenger's side vent towards the door opening to release the tabs (D).

Fig 1: Pushing Lower Clips
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Reinstall the tab portions of the vent first, then push the clip portions into place securely.