Instrument Panel Removal/Installation
NOTE:
- When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.
- Take care not to scratch the dashboard and related parts.
- Tilt the steering column down.
- Remove the steering column upper cover (see step 4 on REMOVAL ).
- Remove the instrument panel (A).
- Remove the screws (B).
- Gently pull out along the bottom to release the clips (C) and hooks (D).
- Gently pull out the upper portion of the panel.
- Install the panel in the reverse order of removal.