Steering Column Removal and Installation: Removal
- Record the radio station presets, and disconnect the battery.
- Remove the driver's airbag assembly and the steering wheel (see Steering Wheel Removal ).
- Remove the driver's dashboard lower covers.
- Remove the column covers (A).
- Remove the combination switch assembly (B) from the steering column shaft by removing the screw (C) on the top of the combination switch.
- Disconnect the 2P, 6P, and 7P connectors from the ignition switch.
- Disconnect the steering joint (D), and remove it from the column shaft.
- Remove the steering column (E) by removing the attaching nuts and bolts.