Knee Bolster Removal/Installation

KNEE BOLSTER REMOVAL/INSTALLATION

1. Disconnect the negative battery cable.

2. Remove the following parts:
a. Driver-side front scuff plate Front Scuff Plate Removal/Installation

b. Drive-side front side trim Front Side Trim Removal/Installation

c. Upper panel Upper Panel Removal/Installation

d. Drive-side decoration panel Decoration Panel Removal/Installation

e. Hood release lever Service and Repair

f. Meter hood Meter Hood Removal/Installation

g. Drive-side lower panel Lower Panel Removal/Installation

3. Remove the bolts.






4. Remove the knee bolster.

5. Install in the reverse order of removal.