Installation

VF4BM TRANSFER / 4WD / AWD: TRANSFER CASE FRONT OIL SEAL: REPLACEMENT

1. DRAIN TRANSFER OIL Service and Repair

2. REMOVE FRONT PROPELLER SHAFT ASSEMBLY

(a) Remove the front propeller shaft Removal.

3. REMOVE FRONT OUTPUT SHAFT COMPANION FLANGE SUB-ASSEMBLY Disassembly

4. REMOVE FRONT TRANSFER OUTPUT SHAFT COMPANION FLANGE OIL SEAL Disassembly

5. REMOVE TRANSFER CASE FRONT OIL SEAL





(a) Using SST, tap out the oil seal.

SST : 09308-00010

NOTICE:
Be careful not to damage the oil seal and front case contact surface.

6. INSTALL TRANSFER CASE FRONT OIL SEAL





(a) Coat the lip of a new oil seal with MP grease.

(b) Using SST and a hammer, tap in the oil seal until its metal ring contacts the case.

SST : 09649-17010

SST : 09950-70010

09951-07100

7. INSTALL FRONT TRANSFER OUTPUT SHAFT COMPANION FLANGE OIL SEAL Reassembly

8. INSTALL FRONT OUTPUT SHAFT COMPANION FLANGE SUB-ASSEMBLY Reassembly

9. INSTALL FRONT PROPELLER SHAFT ASSEMBLY

(a) Install the front propeller shaft Installation.

10. ADD TRANSFER OIL Testing and Inspection

11. CHECK FOR TRANSFER OIL LEAK