LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2011 >> GX 460 V8-4.6L (1UR-FE) >> Repair and Diagnosis >> Transmission and Drivetrain >> Drive/Propeller Shafts, Bearings and Joints >> Drive/Propeller Shaft >> Service and Repair >> Removal and Replacement >> Front Propeller Shaft Assembly >> Removal

Removal





DRIVE SHAFT / PROPELLER SHAFT: FRONT PROPELLER SHAFT ASSEMBLY: REMOVAL

1. REMOVE FRONT EXHAUST PIPE

(a) Remove the front exhaust pipe Removal.

2. REMOVE PROPELLER SHAFT HEAT INSULATOR WITH BRACKET





(a) Remove the 2 bolts and propeller shaft heat insulator with bracket.

3. REMOVE FRONT PROPELLER SHAFT ASSEMBLY

(a) Place matchmarks on the propeller shaft flange and differential.





Text in Illustration





(b) Remove the 4 nuts, 4 bolts, 4 washers and front propeller shaft assembly.

(c) Place matchmarks on the propeller shaft flange and transfer flange.





Text in Illustration





(d) Remove the 4 nuts, 4 washers and front propeller shaft assembly.
scientia non olet · About LEMON Manuals