Removal
PARKING BRAKE: PARKING BRAKE CABLE: REMOVAL
1. REMOVE REAR WHEEL
2. DISCONNECT REAR DISC BRAKE CYLINDER ASSEMBLY
(a) Remove the 2 bolts and disconnect the rear disc brake cylinder.
NOTICE:
- Do not disconnect the flexible hose from the disc brake cylinder.
- Do not twist or bend the flexible hose.
(b) Hang the disc brake cylinder with a piece of wire.
3. REMOVE REAR DISC Removal
4. REMOVE PARKING BRAKE SHOE RETURN SPRING Disassembly
5. REMOVE NO. 1 PARKING BRAKE SHOE ASSEMBLY Disassembly
6. REMOVE NO. 2 PARKING BRAKE SHOE ASSEMBLY Disassembly
7. REMOVE PARKING BRAKE SHOE LEVER SUB-ASSEMBLY Disassembly
8. DISCONNECT NO. 3 PARKING BRAKE CABLE ASSEMBLY Disassembly
9. REMOVE HEIGHT CONTROL UNIT PROTECTOR ASSEMBLY Removal
10. REMOVE REAR NO. 2 SUSPENSION CONTROL ACCUMULATOR BRACKET Removal
11. REMOVE ENGINE ROOM SIDE COVER LH (w/ Cool Box) Removal
12. REMOVE ENGINE ROOM SIDE COVER RH (w/ Cool Box) Removal
13. REMOVE UPPER RADIATOR SUPPORT SEAL (w/ Cool Box) Removal
14. RECOVER REFRIGERANT FROM REFRIGERATION SYSTEM (w/ Cool Box) Service and Repair
15. REMOVE FRONT SEAT ASSEMBLY LH (w/ Cool Box)
(a) Remove the front seat assembly LH Removal.
16. REMOVE REAR CONSOLE BOX SUB-ASSEMBLY (w/o Cool Box)
(a) Remove the rear console box sub-assembly Removal.
17. REMOVE COOLING BOX ASSEMBLY (w/ Cool Box)
(a) Remove the cooling box assembly Removal.
18. REMOVE NO. 2 PARKING BRAKE CABLE ASSEMBLY
(a) Loosen the adjusting nut.
(b) Disconnect the No. 2 parking brake cable from the No. 1 parking brake pull rod.
(c) Pinch the claws of the No. 2 parking brake cable and push the cable outside of the vehicle slightly.
(d) Tilt the fuel tank Removal so that bolt A in the illustration can be removed.
(e) Remove the 6 bolts and No. 2 parking brake cable.
(f) Remove the No. 2 parking brake cable clamp from the No. 2 parking brake cable.
19. REMOVE NO. 3 PARKING BRAKE CABLE ASSEMBLY
(a) Loosen the adjusting nut.
(b) Disconnect the No. 3 parking brake cable from the No. 1 parking brake pull rod.
(c) Pinch the claws of the No. 3 parking brake cable and push the cable outside of the vehicle slightly.
(d) Remove the 6 bolts and No. 3 parking brake cable.
(e) Remove the No. 3 parking brake cable clamp from the No. 3 parking brake cable.