Removal

AUDIO / VIDEO: MULTI-DISPLAY (w/o Navigation System): REMOVAL

1. REMOVE ENGINE ROOM SIDE COVER LH Removal

2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

3. REMOVE NO. 3 INSTRUMENT PANEL REGISTER ASSEMBLY Removal

4. REMOVE NO. 4 INSTRUMENT PANEL REGISTER ASSEMBLY Removal

5. REMOVE MULTI-DISPLAY ASSEMBLY WITH BRACKET






(a) Remove the 2 screws and 2 bolts.






(b) Pull the display to detach the 2 claws and 4 clips on the backside of the display.
(c) Disconnect the connectors and remove the display.
6. REMOVE NO. 1 RADIO RECEIVER BRACKET






(a) Remove the 3 bolts and bracket.
7. REMOVE NO. 2 RADIO RECEIVER BRACKET






(a) Remove the 3 bolts and bracket.