Side Lamp/Front Turn Signal Lamp Bulb

Side Lamp/Front Turn Signal Lamp Bulb

Aerodynamic Style Headlamp










Sealed Beam Style Headlamp









Removal and Installation

Aerodynamic style headlamp

1. Remove the headlamp assembly. For additional information, refer to Headlamp Assembly Service and Repair.

Sealed beam style headlamp

2. Remove the 4 bolts and the side lamp/front turn signal lamp housing.
- Disconnect the electrical connectors.


All headlamp types

3. Rotate the bulb holder counterclockwise approximately one-eighth turn and remove it.
- Separate the bulb from the bulb holder.


4. To install, reverse the removal procedure.