Instrument Cluster Bezel - Installation

INSTALLATION

NOTE: LHD model shown in illustration. RHD model similar.

NOTE: Steering column removed from illustration for clarity.





1. If removed, install the instrument panel air outlet onto the back of the cluster bezel Air Outlet - Installation.
2. Install the cluster bezel (1) onto the instrument panel (2). Make sure the snap retainers are fully engaged to the instrument panel.
3. Install the left instrument panel end cap Instrument Panel End Cap - Installation.
4. Install the steering column opening cover Steering Column Opening Cover - Installation.
5. Install the instrument panel top cover Instrument Panel Cover - Installation.
6. Reconnect the negative battery cable.