Sunroof Window Replacement (Crew Cab)

Sunroof Window Replacement (Crew Cab)

Removal Procedure

Note:
The sunroof must be in the fully closed position prior to removing the sunroof window.

1. Open the sunshade panel.





2. Remove the 4 screws (2) that retain the sunroof window (1) to the sunroof module assembly.

3. Remove the sunroof window from the top of the vehicle.

Installation Procedure





1. Position the sunroof window (1) to the vehicle.

2. Loosely insert the screws (2) that retain the sunroof window (1) to the sunroof module assembly.

Caution:
Refer to Fastener Caution Fastener Caution.

3. Adjust the sunroof window panel as necessary. Refer to Sunroof Window Height and Opening Fit Adjustment (Extended Cab) Sunroof Window Height and Opening Fit Adjustment (Extended Cab)Sunroof Window Height and Opening Fit Adjustment (Crew Cab) Sunroof Window Height and Opening Fit Adjustment (Crew Cab).

Tighten the screws to 3 Nm (27 lb in).