Transmission Rear Mount Replacement

Transmission Rear Mount Replacement

Removal Procedure

1. Remove steering gear. Refer to Steering Gear Replacement (Steering Gear Replacement).
2. Remove transmission rear mount bracket. Refer to Transmission Mount Bracket Replacement - Rear (Transmission Mount Bracket Replacement - Rear).




3. Remove 2 transmission rear mount nuts (3) and 2 transmission rear mount bolts (1).
4. Remove transmission rear mount (2).

Installation Procedure




1. Install transmission rear mount (2).
2. Install 2 transmission rear mount bolts (1).

Caution: Refer to Fastener Caution (Fastener Caution).

3. Install 2 transmission rear mount nuts (3) and tighten to 110 Nm (82 lb ft).
4. Install transmission rear mount bracket. Refer to Transmission Mount Bracket Replacement - Rear (Transmission Mount Bracket Replacement - Rear).
5. Install steering gear. Refer to Steering Gear Replacement (Steering Gear Replacement).