Quarter Lower Rear Trim Panel Replacement

Quarter Lower Rear Trim Panel Replacement (Impala)

Removal Procedure




1. Remove the rear seat cushion. Refer to Rear Seat Cushion Replacement (Rear Seat Cushion Replacement) in Seats.
2. Remove the rear seat back. Refer to Rear Seat Back Cushion Replacement (Non Folding) (Rear Seat Back Cushion Replacement (Non Folding))Rear Seat Back Cushion Replacement (Folding) (Rear Seat Back Cushion Replacement (Folding)) in Seats.
3. Pull out on the rear quarter upper trim panel to disengage the lower connector. Refer to Quarter Upper Trim Panel Replacement (Impala) (Quarter Upper Trim Panel Replacement).
4. Pull up to disengage the carpet retainer leg clip and out to disengage the quarter panel clips.
5. Slide the panel down and out from under the quarter upper panel.
6. Remove the rear quarter lower trim panel from the vehicle.

Installation Procedure




1. Align the rear quarter lower trim panel push-in retainers to the rear quarter inner lower panel and to the rear door weatherstripping.
2. Install the rear quarter lower trim panel by applying pressure to secure at all push-in retainers locations.
3. Install the quarter upper trim panel. Refer to Quarter Upper Trim Panel Replacement (Impala) (Quarter Upper Trim Panel Replacement).
4. Install the rear seat back. Refer to Rear Seat Back Cushion Replacement (Non Folding) (Rear Seat Back Cushion Replacement (Non Folding))Rear Seat Back Cushion Replacement (Folding) (Rear Seat Back Cushion Replacement (Folding)) in Seats.
5. Install the rear seat cushion. Refer to Rear Seat Cushion Replacement (Rear Seat Cushion Replacement) in Seats.