Occupant Weight Sensor OWS, Cleaning [2018-2022]
NOTE:
For information on Volvo color coded illustrations, refer to: IMAGES
.
| Materials | |
|---|---|
| Designation | Part number |
| H Cleaner | 1161436 |
CLEANING
Remove Occupant weight sensor OWS. Refer to: OCCUPANT WEIGHT SENSOR OWS
WARNING:
Wear safety goggles and protective gloves.
NOTE:
Make sure that the component is clean and free of foreign material.
Use: H Cleaner, 1161436
CAUTION:
Make sure that the area around the component is clean and free of foreign material.
WARNING:
Make sure to remove any spilled silicon(e) immediately.
CAUTION:
Make sure that silicone waste is handled according to local regulations.
Install Occupant weight sensor OWS. Refer to: OCCUPANT WEIGHT SENSOR OWS
Calibrate according to: Diagnostics / Components / Control modules / Supplemental Restraint System Module (SRS) / Diagnostic sequences / Calibration of Occupancy weight sensor passenger seat (OWS)