Occupant Weight Sensor OWS, Check [2018-2022]
NOTE:
For information on Volvo color coded illustrations, refer to: IMAGES
.
CHECK
Remove seat cushion front seat. Refer to: FRONT SEAT CUSHION
Check the component for leaks.
Install seat cushion front seat. Refer to: FRONT SEAT CUSHION
Calibrate according to: Diagnostics / Components / Control modules / Supplemental Restraint System Module (SRS) / Diagnostic sequences / Calibration of Occupancy weight sensor passenger seat (OWS)
CAUTION:
Make sure that silicone waste is handled according to local regulations.
CAUTION:
This step is only necessary in case the component leaks.
Perform Occupant weight sensor OWS, cleaning. Refer to: OCCUPANT WEIGHT SENSOR OWS, CLEANING