Compass Calibration [2018-2022]
SETTING THE GEOGRAPHIC AREA.
VEHICLES WITH ELECTRONIC COMPASS
Set the vehicle to Active mode, described in user mode. Refer to: USAGE MODE
A number between 1 and 15 appears for the set geographical area.
Follow the action information below.
Press the button repeatedly until a number between 1 and 15 for the relevant geographical area appears.
After about 4 seconds, the display reverts to showing the compass direction.
Press the button repeatedly until a number between 1 and 15 for the relevant geographical area appears.
After about 4 seconds, the display reverts to showing the compass direction.
Press the button repeatedly until a number between 1 and 15 for the relevant geographical area appears.
After about 4 seconds, the display reverts to showing the compass direction.
Press the button repeatedly until a number between 1 and 15 for the relevant geographical area appears.
After about 4 seconds, the display reverts to showing the compass direction.
Press the button repeatedly until a number between 1 and 15 for the relevant geographical area appears.
After about 4 seconds, the display reverts to showing the compass direction.
Press the button repeatedly until a number between 1 and 15 for the relevant geographical area appears.
After about 4 seconds, the display reverts to showing the compass direction.
Press the button repeatedly until a number between 1 and 15 for the relevant geographical area appears.
After about 4 seconds, the display reverts to showing the compass direction.
CALIBRATION
VEHICLES WITH NON-HEATED WINDSCREEN
Calibration must be carried out if the component is replaced with new, or if the display shows "C".
Set the vehicle to Drive mode, described in user mode. Refer to: USAGE MODE
Then drive at a maximum of 8 km/h (5 mph) in a circle (2-3 times) until the compass direction is displayed in the display again.