Vacuum Pump, Brake Booster [2018-2021, B4204T23]: Removal

NOTE:

Removal steps in this procedure may contain installation details.

Remove the fuel pump. Refer to: FUEL PUMP

Courtesy of VOLVO CARS CORPORATION

Release the connector's catch.

Disconnect the connector.

Courtesy of VOLVO CARS CORPORATION

Remove the cable harness clips.

Fold marked part aside.

Courtesy of VOLVO CARS CORPORATION

Release the connector's catch.

Disconnect the connector.

Courtesy of VOLVO CARS CORPORATION

Remove the cable harness clips.

Fold marked part aside.

Courtesy of VOLVO CARS CORPORATION

Undo the hose from the connection.

Courtesy of VOLVO CARS CORPORATION

Loosen the hose clamp.

Undo the hose from the connection.

Fold marked part aside.

Courtesy of VOLVO CARS CORPORATION

Remove the screw.

Torque: M6, 10 Nm

Courtesy of VOLVO CARS CORPORATION

Release the lock.

Fold marked part aside.

Courtesy of VOLVO CARS CORPORATION

Loosen the hose clamp.

Courtesy of VOLVO CARS CORPORATION

Undo the hose from the connection.

Remove the marked part.

Courtesy of VOLVO CARS CORPORATION

WARNING:

Be prepared to collect escaping fluid.

CAUTION:

Make sure that the area around the component is clean and free of foreign material.

CAUTION:

This component is sensitive to "mechanical stresses". If the component has been dropped onto the floor, for example, it must not be installed in a vehicle.

Remove the screws.

Torque: M8, 24 Nm

Courtesy of VOLVO CARS CORPORATION

NOTE:

Make sure that a new component is installed.

Courtesy of VOLVO CARS CORPORATION

CAUTION:

Use lint free cloth.

NOTE:

Make sure that the mating faces are clean and free of foreign material.

Use: Isopropanol, 1161721