Brake Pedal [2018-2021, B4204T23; B4204T27]: Removal

NOTE:

Removal steps in this procedure may contain installation details.

Perform battery disconnecting and connecting. Refer to: BATTERY DISCONNECTING AND CONNECTING

See the safety information regarding pyrotechnic systems. Refer to: SAFETY INFORMATION PYROTECHNICAL SYSTEMS

Follow instruction for handling of non-deployed pyrotechnical part. Refer to: HANDLING NON-DEPLOYED PYROTECHNICAL PART

Remove airbag driver's side knee. Refer to: DRIVER'S KNEE AIRBAG

Remove accelerator pedal. Refer to: ACCELERATOR PEDAL

Courtesy of VOLVO CARS CORPORATION

Remove the screw.

Remove the marked part.

Torque: Air duct, to Cross car beam., 5 Nm

Courtesy of VOLVO CARS CORPORATION

Disconnect the connectors.

Loosen the clip.

Remove bushing push rod. Refer to: BUSHING PUSH ROD

Courtesy of VOLVO CARS CORPORATION

Remove the nut.

Courtesy of VOLVO CARS CORPORATION

Remove the screw.

Remove the marked part.

Courtesy of VOLVO CARS CORPORATION

Remove the marked part.

HINT: It may be necessary to twist or turn the component.