Windscreen At Camera Location, Cleaning [2022]
| Materials | |
|---|---|
| Designation | Part number |
| H Cleaner | 1161436 |
REMOVAL
Remove the marked part.
Remove the marked part.
The graphic shows the back of the component before removal.
Release the catches.
Repeat on the other side.
Remove the marked part.
Use: Interior trim remover
Pull the component in direction of the arrow.
Repeat on the other side.
Tilt the component somewhat.
Do not touch the camera lens.
Clips might come off when removing component.
Remove the marked part.
CLEANING
Make sure to clean your hands before the following step.
Use lint free cloth.
Clean the marked area.
Use: H Cleaner, 1161436
INSTALLATION
Do not touch the camera lens.
Make sure the component is fitted as illustrated.
Ensure that all clips engage.
Check that the component has locked in its position.
To install, reverse the removal procedure.