Collision Protection Unit From Behind Front Seat [2018-2022]: Removal
Removal steps in this procedure may contain installation details.
Remove front seat. Refer to: FRONT SEAT
Components that must always be replaced with new.
- Head restraint
- Head restraint bushing
- Backrest frame
- Screw
- Screw
- Clip
- Lumbar support
Depress the locking device.
Depress the locking devices.
Remove the marked part.
The part is not to be reused.
Remove the clip.
Remove the marked part.
The graphic shows the back of the component before removal.
Remove the clip.
Remove the marked part.
Remove the clip.
Remove the marked part.
VEHICLES WITHOUT POWER SEATS
Remove the marked part.
Remove the marked part.
ALL VEHICLES
Remove the screws.
The graphic shows the back of the component before removal.
Remove the marked part.
VEHICLES WITH LUMBAR SUPPORT, ELECTRIC
Loosen the clip.
Disconnect the connector.
Remove the marked part.
ALL VEHICLES
Remove the screws.
The graphic shows the back of the component before removal.
Remove the marked part.
Disconnect the connector.
Fold marked part aside.
Release the locks.
Remove the marked parts.
The part is not to be reused.
Remove the marked part.
Orientation view
Release the catches.
Remove the marked part.
The part is not to be reused.
VEHICLES WITH LUMBAR SUPPORT, ELECTRIC
Orientation view
Disconnect the connector.
Loosen the clips.
Release the catches.
Remove the marked part.
The part is not to be reused.
VEHICLES WITH POWER SEATS
Remove the fastener.
Remove the marked part.
Remove the screw.
Remove the marked part.
ALL VEHICLES
Disconnect connector ignition cable. Refer to: IGNITER WIRE CONNECTOR
Disconnect the connector.
Remove the nuts.
Torque: Air bag to seat (SIPS), 7Nm
Loosen the wiring harness or move it to the side.
Remove the marked part.
Remove the cable harness clips.
Remove the cable harness clips.
Remove the cable harness clips.
Remove the clip.
Loosen the wiring harness or move it to the side.
ON BOTH SIDES.
Remove the screw.
The part is not to be reused.
Remove the screw.
Remove the marked part.
The part is not to be reused.