Airbag, Passenger Side [2018-2022]: Removal
Removal steps in this procedure may contain installation details.
Follow instructions about safety information pyrotechnical system. Refer to: SAFETY INFORMATION PYROTECHNICAL SYSTEMS
See information regarding the handling of non-deployed pyrotechnical parts. Refer to: HANDLING NON-DEPLOYED PYROTECHNICAL PART
Perform battery disconnecting and connecting. Refer to: BATTERY DISCONNECTING AND CONNECTING
The supplemental restraint system (SRS) is active for a certain length of time after the power supply has been disconnected. Wait for a minimum of 30 seconds before disconnecting or removing any SRS components.
Remove glove compartment. Refer to: GLOVE COMPARTMENT
Disconnect connector, ignition cable. Refer to: IGNITER WIRE CONNECTOR
Disconnect the connectors.
Disconnect the connector.
Torque: Airbag, to Dash board, 9Nm
Remove the screws.
Remove the marked part.