Seat Belt Height Adjuster [2017-2022]: Removal

NOTE:

Removal steps in this procedure may contain installation details.

Remove the B-pillar trim panel. Refer to: [B-PILLAR TRIM PANEL]

Courtesy of VOLVO CARS CORPORATION

Torque: Safety belt retractor front to body, 40Nm

Loosen the screws.

Fold marked part aside.

Courtesy of VOLVO CARS CORPORATION

Torque: M8, 24Nm

Loosen the screws.

Remove the marked part.

Courtesy of VOLVO CARS CORPORATION

NOTE:

Make sure that the component is installed.