Exhaust System, Check [2017-2019, B4204T23 | 2017-2020, 2022, B4204T27 | 2018-2022, B4204T28]
NOTE:
For information on Volvo color coded illustrations, refer to: IMAGES
.
REMOVAL
See information about lifting points body. Refer to: [JACKING POINTS BODY]
Loosen the screws.
Remove the marked part.
Remove the screws.
Remove the clips.
LEAK DETECTION
NOTE:
Always follow the manufacturer's instructions when handling the equipment.
- Make sure that the opening is blocked.
- Use: Leak detection equipment (smoke generator)
- Check the component for leaks.
Check the component for leaks.
Remove the Special Tool.
INSTALLATION
Install the marked component.
Install the screws.
Press the clip(s) into position.