Brake Pedal [2020-2022, B4204T28 | 2020-2022, B4204T39 | 2021, B420T | 2021-2022, B420T2]: Removal

NOTE:

Removal steps in this procedure may contain installation details.

Perform battery disconnecting and connecting. Refer to: [BATTERY DISCONNECTING AND CONNECTING]

See the safety information regarding pyrotechnic systems. Refer to: [SAFETY INFORMATION PYROTECHNICAL SYSTEMS]

Follow instruction for handling of non-deployed pyrotechnical part. Refer to: [HANDLING NON-DEPLOYED PYROTECHNICAL PART]

Remove airbag driver's side knee. Refer to: [DRIVER'S KNEE AIRBAG]

Remove accelerator pedal. Refer to: [ACCELERATOR PEDAL]

Courtesy of VOLVO CARS CORPORATION

Remove the screw.

Remove the marked part.

Torque: Air duct, to Cross car beam, 5Nm

Courtesy of VOLVO CARS CORPORATION

Disconnect the connectors.

Loosen the clip.

Remove bushing push rod. Refer to: [BUSHING PUSH ROD]

Courtesy of VOLVO CARS CORPORATION

Remove the nut.

Courtesy of VOLVO CARS CORPORATION

Remove the screw.

Remove the marked part.

Courtesy of VOLVO CARS CORPORATION

Remove the marked part.

HINT: It may be necessary to twist or turn the component.