Brake Pedal [2017-2019, B4204T23 | 2017-2022, B4204T27]: Removal
Removal steps in this procedure may contain installation details.
Perform battery disconnecting and connecting. Refer to: [BATTERY DISCONNECTING AND CONNECTING]
See the safety information regarding pyrotechnic systems. Refer to: [SAFETY INFORMATION PYROTECHNICAL SYSTEMS]
Follow instruction for handling of non-deployed pyrotechnical part. Refer to: [HANDLING NON-DEPLOYED PYROTECHNICAL PART]
Remove airbag driver's side knee. Refer to: [DRIVER'S KNEE AIRBAG]
Remove accelerator pedal. Refer to: [ACCELERATOR PEDAL]
Remove the screw.
Remove the marked part.
Torque: Air duct, to Cross car beam, 5Nm
Disconnect the connectors.
Loosen the clip.
Remove bushing push rod. Refer to: [BUSHING PUSH ROD]
Remove the nut.
Remove the screw.
Remove the marked part.
Remove the marked part.
HINT: It may be necessary to twist or turn the component.