Removal And Installation
REMOVAL
NOTE:
Orientation view
Remove the screws.
NOTE:
The graphic shows the back of the component before removal.
Remove the marked part.
Remove the screws.
NOTE:
Orientation view
Remove the part carefully
Disconnect the connector.
Remove the marked part.
Fold marked part aside.
Remove the screws.
Remove the screw.
NOTE:
The graphic shows the back of the component before removal.
Remove the marked part.
Remove the cable harness clips.
Disconnect the connectors.
TRANSFERRING COMPONENTS
NOTE:
Orientation view
Loosen the component indicated. Do not remove it.
Remove the marked part.
Release the catches.
Remove the marked part.
Release the catches.
Remove the marked part.
VEHICLES WITH GLOVE COMPARTMENT COOLING
NOTE:
Orientation view
- Remove the screw.
- Remove the marked part.
INSTALLATION
To install, reverse the removal procedure.