Removal And Installation
REMOVAL
NOTE:
Orientation view
Remove the screws.
NOTE:
The graphic shows the back of the component before removal.
Remove the marked part.
Remove the screws.
NOTE:
Orientation view
Loosen the marked detail.
Disconnect the connector.
Remove the marked part.
Fold marked part aside.
Remove the screws.
Remove the screw.
NOTE:
The graphic shows the back of the component before removal.
Remove the marked part.
Remove the cable harness clips.
Disconnect the connectors.
TRANSFERRING COMPONENTS
NOTE:
Orientation view
Release the lock.
Remove the marked part.
Release the catches.
Remove the marked part.
Release the catches.
Remove the marked part.
VEHICLES WITH GLOVE COMPARTMENT COOLING
NOTE:
Orientation view
- Remove the screw.
- Remove the marked part.
INSTALLATION
To install, reverse the removal procedure.