Brake Disc Front, Checking [2017-2018]: Check
Remove brake calliper, front, refer to: FRONT BRAKE CALIPER
NOTE:
Make sure that the mating faces are clean and free of foreign material.
Torque: M14, 130Nm
Slowly rotate the brake disc and note the dial indicator gauge readings.
Special Tool: 981 3134 and Special Tool: 999 5420
NOTE:
The following steps are only necessary when installing a new component.
Perform wheel hub front, checking, refer to: WHEEL HUB FRONT, CHECKING
Remove the front brake disc, refer to: FRONT BRAKE DISC