Brake Diagnose Switch [2014-2018]
Perform brake light switch procedure, see below
REMOVAL
See information on component position brake light switch, refer to: LOCATION OF COMPONENTS, STOPLAMP SWITCH
CAUTION:
Make sure that the brake pedal remains in the rest position.
CAUTION:
Make sure that the brake pedal remains in the rest position.
CAUTION:
Both switches must be removed before installing a new switch.
INSTALLATION
To install, reverse the removal procedure.
Check according to: DIAGNOSTICS/VEHICLE COMMUNICATION/Advanced/CEM/Checking and adjusting, brake light switch and brake pedal position switch