Brake Disc Front, Checking [2014-2015, B4204T10, TG-81SC | 2014-2016, B4204T11; B4204T9, TG-81SC | 2014-2016, B4204T12, TG-81SC | 2015-2016, B5254T12, TF-80SC AWD | 2016, B5254T12, TF-80SD AWD | 2014-2016, B6304T4, TF-80SC AWD | 2014-2015, B6324S4; B6324S5, TF-80SC AWD]: Check

Courtesy of VOLVO CARS CORPORATION

Refer to Special Tool: 999 5418  

Remove brake calliper, front. Refer to FRONT BRAKE CALIPER

Courtesy of VOLVO CARS CORPORATION

NOTE:

Make sure that the mating faces are clean and free of foreign material.

Refer to Special Tool: 999 7104  

Torque:  M14, 130Nm

Courtesy of VOLVO CARS CORPORATION

Refer to Special Tool: 999 5420  

Courtesy of VOLVO CARS CORPORATION

Refer to Special Tool: 981 3134   and Special Tool: 999 5420  

Slowly rotate the brake disc and note the dial indicator gauge readings.

NOTE:

The following steps are only necessary when installing a new component.

Perform wheel hub front, checking. Refer to WHEEL HUB FRONT, CHECKING

Remove the front brake disc. Refer to FRONT BRAKE DISC