Brake Disc Front, Checking [2009-2012, 2017 | 2013, B6304T4, TF-80SC AWD | 2013-2014, B6324S4; B6324S5, TF-80SC | 2013, B6324S4; B6324S5, TF-80SC AWD]: Check
Refer to Special Tool: 999 5418
Remove brake calliper, front. Refer to FRONT BRAKE CALIPER
NOTE:
Make sure that the mating faces are clean and free of foreign material.
Refer to Special Tool: 999 7104
Torque: M14, 130Nm
Refer to Special Tool: 999 5420
Slowly rotate the brake disc and note the dial indicator gauge readings.
Refer to Special Tool: 981 3134 and Special Tool: 999 5420
NOTE:
The following steps are only necessary when installing a new component.
Perform wheel hub front, checking. Refer to WHEEL HUB FRONT, CHECKING
Remove the front brake disc. Refer to FRONT BRAKE DISC