WASTEGATE Control Valve Adjustment [2009-2010, B6304T2 | 2011-2016, B6304T4]: Check
Remove right front wheel. Refer to WHEELS
Use: Universal oil, 1161657
Refer to Special Tool: 951 2986
CAUTION:
Make sure that the component moves freely between the end positions.
Repeat the following steps until the component moves freely. Some minimal binding is permitted.
- Adjust to the specified value.
- Close the shutoff valve.
- Remove the hose.
- Check that the pressure-drop remains within the specified values.
- Refer to table. See WASTEGATE VALVE .
- CAUTION: If the specified pressure is exceeded repeat the steps 1 through 4 above.
- Refer to table. See WASTEGATE VALVE .
Note the value.
- Refer to table. See WASTEGATE VALVE .
- Refer to table. See WASTEGATE VALVE .
- CAUTION: If the specified pressure is exceeded repeat the steps 1 through 4 above.
Note the value.
Calculate the average value.
Follow the instructions for wastegate valve. Refer to WASTEGATE VALVE
If the average value is not according to specifications, adjust the stroke.