Accessory Installation

EQUIPMENT 

Courtesy of VOLVO CARS CORPORATION

Courtesy of VOLVO CARS CORPORATION

Courtesy of VOLVO CARS CORPORATION

COMPONENT OVERVIEW 

Courtesy of VOLVO CARS CORPORATION

INFORMATION 

• Read through all of the instructions before starting installation.
• Notifications and warning texts are for your safety and to minimize the risk of something breaking during installation.
• Ensure that all tools stated in the instructions are available before starting installation.
• Certain steps in the instructions are only presented in the form of images. Explanatory text is also given for more complicated steps.
• In the event of any problems with the instructions or the accessory, contact your local Volvo dealer.

COLOR SYMBOLS 

Courtesy of VOLVO CARS CORPORATION

1. Used for focused component, the component with which you will do something.
2. Used as extra colors when you need to show or differentiate additional parts.
3. Used for attachments that are to be removed/installed. May be screws, clips, connectors, etc.
4. Used when the component is not fully removed from the vehicle but only hung to the side.
5. Used for standard tools and special tools.
6. Used as background color for vehicle components.

APPLIES TO THE S60 / V60 MODELS 

REMOVAL 

Courtesy of VOLVO CARS CORPORATION

Remove the screws.

Repeat on the other side.

Courtesy of VOLVO CARS CORPORATION

Remove the screws.

APPLIES TO V60 MODELS 

Courtesy of VOLVO CARS CORPORATION

ALL VEHICLES 

Courtesy of VOLVO CARS CORPORATION

Request the aid of a colleague for this procedure.

Courtesy of VOLVO CARS CORPORATION

Courtesy of VOLVO CARS CORPORATION

Disconnect the connector, if applicable.

Courtesy of VOLVO CARS CORPORATION

Courtesy of VOLVO CARS CORPORATION

Locate relevant marking.

Courtesy of VOLVO CARS CORPORATION

Use:  Pipe cutter

Courtesy of VOLVO CARS CORPORATION

Courtesy of VOLVO CARS CORPORATION

Courtesy of VOLVO CARS CORPORATION

Courtesy of VOLVO CARS CORPORATION

Request the aid of a colleague for this procedure.

ACCESSORY INSTALLATION 

Courtesy of VOLVO CARS CORPORATION

Courtesy of VOLVO CARS CORPORATION

Courtesy of VOLVO CARS CORPORATION

Request the aid of a colleague for this procedure.

Courtesy of VOLVO CARS CORPORATION

Courtesy of VOLVO CARS CORPORATION

Courtesy of VOLVO CARS CORPORATION

Courtesy of VOLVO CARS CORPORATION

Courtesy of VOLVO CARS CORPORATION

Courtesy of VOLVO CARS CORPORATION

Place the Bumper Cover in position for installation.

Connect the connector.

Reinstall the removed parts in reverse order.

APPLIES TO XC60 MODELS 

REMOVAL 

Courtesy of VOLVO CARS CORPORATION

Courtesy of VOLVO CARS CORPORATION

Remove the screws.

Courtesy of VOLVO CARS CORPORATION

Remove the screws.

Repeat on the other side.

Courtesy of VOLVO CARS CORPORATION

Courtesy of VOLVO CARS CORPORATION

Disconnect the connector.

Courtesy of VOLVO CARS CORPORATION

Courtesy of VOLVO CARS CORPORATION

Use:  Pipe cutter

Courtesy of VOLVO CARS CORPORATION

Courtesy of VOLVO CARS CORPORATION

Courtesy of VOLVO CARS CORPORATION

Request the aid of a colleague for this procedure.

ACCESSORY INSTALLATION 

Courtesy of VOLVO CARS CORPORATION

Courtesy of VOLVO CARS CORPORATION

Courtesy of VOLVO CARS CORPORATION

Courtesy of VOLVO CARS CORPORATION

Courtesy of VOLVO CARS CORPORATION

Courtesy of VOLVO CARS CORPORATION

Courtesy of VOLVO CARS CORPORATION

Reinstall the removed parts in reverse order.