Accessory Installation
EQUIPMENT
COMPONENT OVERVIEW
INFORMATION
- Read through all of the instructions before starting installation.
- Notifications and warning texts are for your safety and to minimize the risk of something breaking during installation.
- Ensure that all tools stated in the instructions are available before starting installation.
- Certain steps in the instructions are only presented in the form of images. Explanatory text is also given for more complicated steps.
- In the event of any problems with the instructions or the accessory, contact your local Volvo dealer.
COLOR SYMBOLS
NOTE:
This color chart displays (in color print and electronic version) the importance of the different colors used in the images of the method steps.
- Used for focused component, the component with which you will do something.
- Used as extra colors when you need to show or differentiate additional parts.
- Used for attachments that are to be removed/installed. May be screws, clips, connectors, etc.
- Used when the component is not fully removed from the vehicle but only hung to the side.
- Used for standard tools and special tools.
- Used as background color for vehicle components.
REMOVAL
APPLIES TO VEHICLES WITH SINGLE END PIPE
Use: Pipe cutter
ACCESSORY INSTALLATION
Torque: M10, 50Nm
NOTE:
The Diffuser (accessory) must be installed on the vehicle.
On both sides.
Torque: M10, 50Nm
REMOVAL
APPLIES TO VEHICLES WITH DOUBLE END PIPE
Use: Pipe cutter
Use: Pipe cutter
ACCESSORY INSTALLATION
NOTE:
The Diffuser (accessory) must be installed on the vehicle.
On both sides.
Torque: M10, 50Nm