Preparatory Work

NOTE:

When working on the steering or wheel alignment on cars with DSTC, the adaptation of the steering wheel angle must be set to zero using Volvo's VIDA (Test drive).

NOTE:

When checking and adjusting wheel angles, follow the preparation instructions carefully.

Since the car's rear wheels also have an adjustable toe angle, the toe angle of the front wheels must also be adjusted in relation to the geometrical driving axis (thrust line) in order to maximize stability and minimize tire wear.

All measurements must be made using alignment equipment for four-wheel drive vehicles.

All measurements must be made with the car empty.

All measurements must be made with a full fuel tank.

Check all the tire pressures before beginning measurement.