A/C Compressor Oil [2017-2018, B4204T11]

The table below applies to component replacements, to ensure that the correct amount of oil is maintained in the AC system, does not apply to AC compressor, see below.

The system can be filled through the service valve or on each loose unit before assembly.

If several of the components below are replaced at the same time, the total added oil volume must not exceed 80cm³ .

Se table below.

Component	Oil level with drier, integrated in condenser
Evaporator	20 cm³
Condenser	30 cm³
Tube	10 cm³
Hose	10 cm³

Oil return when reusing AC compressor

Drain the AC compressor of oil, and measure the amount.
Refill the drained oil with the equivalent amount of new oil.
Add an additional 20 cm³ new oil, making sure that the amount does not exceed the oil volume stated on the AC compressor.

Oil return for new AC compressor

Follow the instructions for Oil AC compressor, draining/filling according to VIDA