Fuel Operated Auxiliary Heater Exhaust System [2016, B5254T12]: Removal
NOTE:
Removal steps in this procedure may contain installation details.
Remove right wheel, refer to: WHEELS
Remove the screws.
Remove the nuts.
Remove the marked part.
Remove the screws.
Remove the nuts.
Remove the marked part.
VEHICLES EARLY VERSION
Remove the nuts.
- Torque: Exhaust pipe clamp, Combustion heater, 8Nm
- Torque: M8, 24Nm
VEHICLES LATE VERSION
Remove the nuts.
- Torque: Exhaust pipe clamp, Combustion heater, 8Nm
- Torque: M6, 10Nm