Condenser To Connector Block Line [2017-2018, B4204T11 | 2016, B5254T12]: Installation
CAUTION:
Only use the specified material to lubricate the seals.
NOTE:
Use new seals.
NOTE:
Make sure that the seal is correctly located.
To install, reverse the removal procedure.
Perform vacuum-pumping, refer to: VACUUM PUMPING
Perform refrigerant, filling, refer to: REFRIGERANT, FILLING
Carry out leakage detection with tracing agent, refer to: LEAK DETECTION, TRACER AGENT
Perform climate unit, checking, refer to: CLIMATE CONTROL SYSTEM, CHECK