MECU Power Supply, Value

Measurement range: 0-63 V

Normal range: 12.0-14.5 V

The value indicates the supply voltage to the central electronic module (CEM) when the diagnostic trouble code (DTC) was stored.

Measurement range: 0-63 V

Normal range: 12.0 - 14.5 V

The value indicates the supply voltage to the central electronic module (CEM) when the diagnostic trouble code (DTC) was stored.

Measurement range: 0 - 63 V.

Normal range: 12.0 - 14.5 V.

The value indicates the power supply to the central electronic module (CEM) when the diagnostic trouble code was generated.

The value indicates the supply voltage to the central electronic module (CEM) when the diagnostic trouble code (DTC) was stored.

Measurement range: 0 -63 V.

Normal value when the generator (GEN) is charging: 13.0-14.5 V.

Measurement range: 0-63 V

Normal range: 12.0 - 14.5 V

The value indicates the power supply to the central electronic module (CEM) when the diagnostic trouble code was generated.

Measurement range 0 - 63 V.

Normal range: 12.0 - 14.5 V.

The value indicates the supply voltage to the central electronic module (CEM) when the diagnostic trouble code (DTC) was stored.

Measurement range 0 - 63 V.

Normal range: 12.0 - 14.5 V.

The value indicates the power supply to the central electronic module (CEM) when the diagnostic trouble code was generated.

Measurement range 0 - 63 V.

Normal range: 12.0 - 14.5 V.

The value indicates the supply voltage to the central electronic module (CEM) when the diagnostic trouble code (DTC) was stored.

Measurement range: 0 - 63 V

Normal range: 12.0 - 14.5 V

The value indicates the supply voltage to the central electronic module (CEM) when the diagnostic trouble code (DTC) was stored.