Technical Content

Illustrations in the information may be reused from previous models and may therefore deviate as regards the background's motif. The technical content relevant to the operation is, however, always correct.

Screws coated with friction-generating or sealing elements as well as lock nuts are screws used with lock nuts shall always be replaced unless the instructions specify reuse of the original screw or nut.

Screws or nuts that have been angle-tightened shall always be replaced with a new one.

Gaskets and O-rings shall always be replaced unless the instructions specify reuse of the original gasket or O-ring.

A new decal shall always be affixed after replacement of a component with safety decal. No decals may be painted or permanently covered in any other way.

All tools and equipment used in the instructions are in Volvo's aftermarket standard (A10 - Tools, Equipment & Information). (E10=English, A10=Swedish).

The instruction shall contain links to or all necessary information to perform the operation in a manner that ensures quality and personal safety.

If the spare part is a repair kit, the entire contents of the kit shall be used.