Engine, Installing [2016, B5254T12, TF-80SC AWD]
NOTE:
For information on Volvo color coded illustrations, refer to: IMAGES
SPECIAL TOOLS
| 999 5185 HOOK (LIFTING OUT ENGINE-TO 2810) Tool number: 999 5185 Tool description: HOOK (LIFTING OUT ENGINE-TO 2810) Tool boards: 21 |
|
| 999 2810 LIFTING YOKE (ENGINE) Tool number: 999 2810 Tool description: LIFTING YOKE (ENGINE) Tool boards: 21 |
|
| 999 7298 REMOVAL TOOL Tool number: 999 7298 Tool description: REMOVAL TOOL Tool boards: 23 |
INSTALLATION
CAUTION:
Take extra care when handling the components.
Special Tool: 999 5185 and Special Tool: 999 2810
Install the following items:
- Engine support insulator, right, refer to: ENGINE PAD RIGHT
- Engine support insulator left, refer to: ENGINE PAD LEFT
NOTE:
Make sure that this component is installed to the noted removal position.
CAUTION:
Make sure that the quick release couplings are correctly engaged.
Install the following items:
- air cleaner (ACL) housing, refer to: AIR CLEANER HOUSING
- Temperature and manifold absolute pressure MAPT sensor, refer to: TEMPERATURE AND MANIFOLD ABSOLUTE PRESSURE MAPT SENSOR
- auxiliary drive belt, refer to: AUXILIARY DRIVE BELT
- the catalytic converter, refer to: CATALYTIC CONVERTER
- Drive shaft right, refer to: DRIVE SHAFT RIGHT
- Driveshaft left, refer to: DRIVESHAFT LEFT
- Engine Rear Lower Support Insulator LH, refer to: ENGINE REAR LOWER SUPPORT INSULATOR LH
- plenum cover, refer to: PLENUM COVER
- battery, refer to: BATTERY
Fill cooling system, draining, filling, and bleeding, refer to: COOLING SYSTEM - DRAINING, CHARGING AND BLEEDING
Top up the engine oil, refer to: ENGINE OIL