Carrier Plate [2017-2018, B4204T11, TG-81SC AWD]: Installation
CAUTION:
Make sure that the mating faces are clean and free of foreign material.
CAUTION:
Make sure that the flywheel is in full contact with the crankshaft flange before installing the flywheel bolts.
NOTE:
Make sure that the locating pin on the crankshaft is aligned with the guide hole in the flywheel or flexplate.
Install the screws.
Install the screws.
Torque:Carrier plate,
- Stage 1: 45Nm
- Stage 2: 50°
Remove the screws.
Install the screws.
Torque:Carrier plate,
- Stage 1: 45Nm
- Stage 2: 50°
Remove the screw.
Install the transmission, refer to: TRANSMISSION