Valve Clearance [2017-2018, B4204T11]: Check

HINT: Measure the actual clearance between cam lobe and tappet by installing the tappet with the lowest height.

Courtesy of VOLVO CARS CORPORATION

Install the marked component.

Courtesy of VOLVO CARS CORPORATION

Install the marked component.

Courtesy of VOLVO CARS CORPORATION

Torque: M7, 17Nm

Courtesy of VOLVO CARS CORPORATION

NOTE:

Only tighten the bolts finger tight at this stage.

Tighten the bolts.

Courtesy of VOLVO CARS CORPORATION

Install the screw.

MEASUREMENT 1

Courtesy of VOLVO CARS CORPORATION

Measure and note the valve clearance values.

Use: Feeler gauge

See information about engine, refer to: ENGINE

Courtesy of VOLVO CARS CORPORATION

CAUTION:

Only rotate the camshaft clockwise.

Repeat the measurement for all cylinders.