Engine Cooling Fan [2017-2018, B4204T11, TG-81SC AWD]: Removal

Courtesy of VOLVO CARS CORPORATION

Remove the screws.

Remove the marked detail/details.

Courtesy of VOLVO CARS CORPORATION

Loosen the clip.

Courtesy of VOLVO CARS CORPORATION

Fold marked part aside.

Courtesy of VOLVO CARS CORPORATION

Disconnect the connector.

Courtesy of VOLVO CARS CORPORATION

CAUTION:

Observe caution when carrying out this step.

Courtesy of VOLVO CARS CORPORATION

NOTE:

Make sure that the component is centered.

Courtesy of VOLVO CARS CORPORATION

CAUTION:

Make sure to place the component as the graphic shows.

Courtesy of VOLVO CARS CORPORATION

Lift the marked component up

HINT: It may be necessary to twist or turn the component.