Final Drive Sealing Ring [2017, TG-81SC AWD | 2018, B4204T11, TG-81SC AWD | 2016, B5254T12, TF-80SC AWD]: Removal

NOTE:

Removal steps in this procedure may contain installation details.

Remove the left drive shaft rear, refer to: REAR DRIVE AXLE

Courtesy of VOLVO CARS CORPORATION

Loosen the screws.

Torque: M5, 5Nm

Courtesy of VOLVO CARS CORPORATION

Loosen the screws.

Torque: M12, 80Nm

Courtesy of VOLVO CARS CORPORATION

CAUTION:

Make sure that new bolts are installed.

Loosen the screws.

Torque: Cover plate, to Final drive, 29Nm

Courtesy of VOLVO CARS CORPORATION

WARNING:

Be prepared to collect escaping fluid.

Remove the marked part.

Courtesy of VOLVO CARS CORPORATION

Remove the marked part.

Courtesy of VOLVO CARS CORPORATION

NOTE:

Make sure that the mating faces are clean and free of foreign material.

Courtesy of VOLVO CARS CORPORATION

NOTE:

Make sure that the mating faces are clean and free of foreign material.