Description Of Parameters, Infotainment Head Unit (IHU)

MOST 

TESTING OPTICAL FIBERS 

Indicates if the 3 dB switch is on or off.

Normal = the MOST network has normal light intensity.

-3 dB = the MOST network's light intensity is reduced by 3 dB.

MOST LOCKED 

Indicates whether the MOST network is closed and communication possible.

OK = communication possible.

not OK = communication not possible.

NUMBER OF CONTROL MODULES IN THE MOST NETWORK 

Shows the number of control modules on the MOST network.

STEERING WHEEL BUTTONS 

OK/MENU/TUNE 

Steering wheel button - volume + 

Steering wheel button - Volume - 

Steering wheel button - forward 

Steering wheel button - back 

EXIT button 

Voice control 

Released = the control module interprets the selected button as not being pressed in.

Pressed in = the control module interprets the selected button as being pressed in.

GPS INFORMATION 

GPS ALTITUDE 

Shows height.

GPS Current latitude on map 

Shows position on map.

GPS Current Longitude on map 

Shows position on map.

GPS Fix 

Shows the support available for navigation.

GPS Vehicle speed 

Indicates the vehicle speed.

GPS Direction of travel 

Indicates the direction of travel.

GPS Year 

Indicates year.

GPS Date 

Indicates date.

GPS Time 

Hour, minutes and seconds. Hour always given as GMT winter time.

GPS Direction of travel 

The direction of the vehicle, expressed in degrees. 000° reference north, is then calculated clockwise 360°.

GPS latitude 

Indicates the vehicle's current position, latitude.

GPS Longitude 

Indicates the vehicle's current position, longitude.

BLUETOOTH INFORMATION (ONLY APPLIES TO VEHICLES WITH INFOTAINMENT HEAD UNIT (IHU)) 

BLUETOOTH, SIGNAL QUALITY 

Shows the signal quality of the connected telephone.

VOLTAGE SUPPLY CONTROL MODULE 

Measurement range: 0 - 25.5 V.

The value indicates the power supply to the control module.

Temp display 

The measured value indicates the display temperature, in °C.

LCD LUMINANCE 

Measurement range 0-100%.

The measured value indicates the relative luminance of the display.

SIGNAL STRENGTH MAIN ANTENNA 

Measurement range 0-100%.

Shows the signal strength for FM-1- /AM-antenna.

NOTE! The radio must be playing for the value to be active, otherwise the value "0" is shown.

Signal strength sub antenna 

Measurement range 0-100%.

Shows the signal strength for FM-2 antenna.

NOTE! The radio must be playing for the value to be active, otherwise the value "0" is shown.