LEMON Manuals: Even more car manuals for everyone
Home >> Volvo >> 2016 >> XC90 T8 R-Design >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Brakes - Hydraulic/Vacuum-Hydraulic - Removal, Replacement And Installation >> Brake Booster Vacuum Hose >> Brake Booster Vacuum Hose [2016-2017 | 2018-2020, B4204T23 | 2018-2019, B4204T27 | 2018-2020, B4204T28 | 2020, B4204T39] >> Removal

Brake Booster Vacuum Hose [2016-2017 | 2018-2020, B4204T23 | 2018-2019, B4204T27 | 2018-2020, B4204T28 | 2020, B4204T39]: Removal

NOTE:

Removal steps in this procedure may contain installation details. 

Remove the plenum cover, refer to: PLENUM COVER

GLL1038755Courtesy of VOLVO CARS CORPORATION

Loosen the screws.

Remove the marked part.

GLL1031407Courtesy of VOLVO CARS CORPORATION

Remove the screws.

Torque:  M6, 10Nm

GLL1030485Courtesy of VOLVO CARS CORPORATION

Remove the screws.

Torque:  M8, 24Nm

GLL1003813Courtesy of VOLVO CARS CORPORATION
  1. Fold marked part aside.
  2. Remove the marked part.
GLL1002730Courtesy of VOLVO CARS CORPORATION

Undo the hose from the connection.

GLL1029565Courtesy of VOLVO CARS CORPORATION

Release the locks.

Undo the hoses from the connections.