Engine Oil [2018-2020, B4204T23; B4204T27; B4204T28 | 2020, B4204T39]: Removal
NOTE:
Removal steps in this procedure may contain installation details.
Remove the marked part.
See information about lifting points body, refer to: JACKING POINTS BODY
Loosen the screws.
Remove the marked part.
WARNING:
Hot fluid.
NOTE:
Use a new seal.
Torque: Drain plug oil pan, 38Nm
CAUTION:
Make sure that the area around the component is clean and free of foreign material.
Refer to: Special Tool: 999 7499
Torque: Oil filter, 25Nm
NOTE:
Use a new seal.
Remove the marked part.
Follow instructions for lubricant, engine, refer to: LUBRICANT, MOTOR