LEMON Manuals: Even more car manuals for everyone
Home >> Volvo >> 2016 >> XC90 T8 R-Design >> Repair and Diagnosis (Single Page) >> Engine Mechanical >> Lubrication System >> Engine - Removal, Replacement And Installation >> Crankshaft Front Seal >> Crankshaft Front Seal [2016-2020, B4204T23; B4204T27; B4204T28 | 2020, B4204T39] >> Installation

Crankshaft Front Seal [2016-2020, B4204T23; B4204T27; B4204T28 | 2020, B4204T39]: Installation

GLL1002932Courtesy of VOLVO CARS CORPORATION

Refer to: Special Tool: 999 7532  

GLL1019800Courtesy of VOLVO CARS CORPORATION

Use:  Engine oil,

GLL1012132Courtesy of VOLVO CARS CORPORATION
CAUTION:

Take extra care not to damage the seal. 

NOTE:

Make sure that the seal is correctly located. 

GLL1039012Courtesy of VOLVO CARS CORPORATION

Torque:  M6, 10Nm

Tighten the bolts.

GLL1036294Courtesy of VOLVO CARS CORPORATION

Refer to: Special Tool: 999 7047 

To install, reverse the removal procedure.