Muffler Rear [2016-2020, B4204T23 | 2016-2020, B4204T27 | 2016-2020, B4204T28 | 2020, B4204T39]: Installation
To install, reverse the removal procedure.
CAUTION:
Make sure to place the component as the graphic shows.
Tighten the nuts.
Torque: M10, 50Nm
ALTERNATIVE 1
NOTE:
Make sure that the seal is correctly located.
Tighten the nut.
Torque: Exhaust end pipe, to Muffler, 25Nm
ALTERNATIVE 2
Tighten the nut.
Torque: M10, 50Nm
On both sides.